Front sub-pump right

F3-3501140

The function of the car caliper: It has the functions of decelerating, stopping or maintaining the stopped state of the moving wheels. Generally, it is only used in the disc brake system. It is the part that protrudes from the outside of the brake pad and can enhance the braking performance.

Узнать сейчас

Back plate

F3-3502102/59

The brake disc, in simple terms, is a round disc that rotates when the car is moving. The brake caliper clamps the brake disc to generate braking force. When the brake is applied, it clamps the brake disc to slow down or stop.

Узнать сейчас

Back film

F3-3502001-C3

Car brake pads, also known as car brake pads, refer to the friction materials fixed on the brake drum or brake disc that rotates with the wheels. The friction linings and friction pads are subjected to external pressure and generate friction to achieve vehicle deceleration. Purpose.

Узнать сейчас

Vacuum booster

F3-3540010

F3,F3R,G3,L3,G3R,new F3,third generation F3

Узнать сейчас

Master cylinder

F3-3505200

The function of the master cylinder is to convert the mechanical energy into the pressure of the brake fluid in the brake oil pipe

Узнать сейчас

ABS pump

F3-3550100

The main function of ABS is to improve the braking performance of the whole vehicle, improve the driving safety, and prevent the wheels from locking (that is, stop rolling) during the braking process, so as to ensure that the driver can still control the direction when braking, and prevent the rear axle. sideslip.

Узнать сейчас

After ABS sensor

F3-4013100-A1

The main function of ABS is to improve the braking performance of the whole vehicle, improve the driving safety, and prevent the wheels from locking (that is, stop rolling) during the braking process, so as to ensure that the driver can still control the direction when braking, and prevent the rear axle. sideslip.

Узнать сейчас

ABS sensor front

F3-3630120

The main function of ABS is to improve the braking performance of the whole vehicle, improve the driving safety, and prevent the wheels from locking (that is, stop rolling) during the braking process, so as to ensure that the driver can still control the direction when braking, and prevent the rear axle. sideslip.

Узнать сейчас

Handbrake line

F3-3508500

The car handbrake cable generally passes through the handbrake and then through the chassis. Then reach the position of the brake pads of the rear wheel. Generally, it acts on the rear wheels. The next line from the cab to the rear axle package is the brake line. This line is obviously different from the wire.

Узнать сейчас

Brake switch F3

F3-3504030

The more common brake light switch sends a level signal through its own on-off to prompt the relevant system action or control the power on-off function of the brake light.

Узнать сейчас

Half shaft assembly left

IB5-2203010

The key role of the half shaft is to transmit power. The axle shafts transfer torque from the differential to the wheels, which drive the car.

Узнать сейчас

Half shaft assembly right

IB5-2203020

The key role of the half shaft is to transmit power. The axle shafts transfer torque from the differential to the wheels, which drive the car.

Узнать сейчас

Outer cage

F3-2203012-C1

The fixed ball cage universal joint (RF joint) is characterized in that in the process of transmitting torque, the main and driven shafts can only rotate relative to each other without axial displacement. It is usually used near the wheel. , which is what we often call the outer cage

Узнать сейчас

Inner cage

F3-2203014

The telescopic ball cage universal joint (VL joint) is characterized in that in the process of transmitting torque, the main and driven shafts can not only rotate relative to each other, but also produce axial displacement. It is usually used close to the drive axle. , which is what we often call the inner cage.

Узнать сейчас

Front bumper skeleton

F3-2803010/70

The anti-collision steel beam is a device used to reduce the impact energy absorbed by the vehicle when it is collided.

Узнать сейчас

Hood lock bracket

F3-8402100/70

It is fixed on the front wall of the car or on the frame of the water tank, which is convenient for checking the fault of the engine compartment.

Узнать сейчас